Due to the influence of high temperature in summer, when the sewing machine runs for a long time, the moving parts may rise too high due to the lack of lubrication, and then produce the situation of stuck. What should we do if the sewing machine gets stuck? Don't worry, the following is a small edition of the sewing machine manufacturer to give you a detailed answer.

Usually, the lubrication device of sewing machine mostly uses a small mailbox, which uses oil line for micro-oil lubrication, in order to effectively avoid oil leakage of the equipment, but such lubrication may make the equipment after long-term use for various reasons, resulting in poor lubrication, resulting in the situation of equipment stuck.

Generally, the position of the sewing machine stuck is mainly in the spinning shuttle and needle rod. In this case, the sewing machine manufacturer suggests that you first clean the surface and interior of the equipment debris, cloth scraps, and so on, and then drop a few drops of kerosene or spray the machine special rust inhibitor in the needle rod part, and then wait 5-10 minutes after hard rotation of the hand wheel, so that the stuck part will be automatically lifted.

After turning the sewing machine, you can wipe the oil with a clean cloth, and then spray the special lubricant on the needle rod. After the lubricant will be dried on the needle rod surface into a lubricating layer, so that the sewing machine in operation, not only wear-resistant, but also effectively avoid oil leakage due to the drop of ordinary oil.

Above is the sewing machine manufacturer to share with you the reasons for the sewing machine jam and the corresponding solution, I hope to help you. If you want to know more about sewing machine information, please feel free to contact us for consultation.