E010 Press the pause switch, and press the RESET button on the operation panel to cancel
E011 Press the pause switch. Please press the RESET key to remove the fault. Press the button to move the cloth to seam.
E015 Press and hold the pause switch continuously, or the pause switch is in poor contact. Turn off the power to confirm the insertion status of the main circuit board plug P13
E016 The pause switch is in poor contact. Turn off the power to confirm the insertion status of the main circuit board plug P13
The above is the common fault code of the emergency stop switch of brother G prototype.E010 E011 is a normal prompt after the operation pause switch and can be removed. E015 E016 emergency stop switch is generally damaged, and a few of the motherboard is damaged.
E025 E035 Generally, the foot switch is stepped down when the boot, unplug the foot switch plug, if no error code is reported, the foot switch is judged to have a problem, otherwise the motherboard is damaged
E036 The pedal type is not set correctly. The options in storage switch 050 or 003 must be set correctly
E050 E055 Detect the head inversion switch when starting up
E051 detection head inversion switch in operation
When the E065 is powered on, it detects that the operation panel key is pressed. Generally, the operation panel key is damaged
About us
Company Profile Corporate image Sewing case Video HonorProduct Center
Swing shuttle computer pattern machine Electronic accessories Spinning shuttle computer pattern machine Template engraving machine Mechanical partsNews Center
Company news Industry News FAQContact us
Service telephone: +86 136-1266-1799 Mechanical after-sales: +86 139-2680-8776 Electronic technology: +86 136-8952-3679 E-mail: sanyou-smart@outlook.com Address: 3rd Floor, Building 1, No. 46 ShimeiScan QR code